What's Sany pleated stainless steel sintered mesh filter？
10inch Stainless Steel Pleated Filter Cartridge
This kind of filter element is made of sintered metallic fiber felt and multi-layer wire mesh.It has porous structure,high strength,good air permeability,porosity,excellent dust holding.It's widely used in polymer,synthetic fiber and chemical production.
Technical data:
Specification | |
Filter rating | 5-60um(fiber felt) 1-300μm(wire mesh) |
Working pressure | Max 30 MPa |
Working medium | Water,Hydraulic oil,Polymer,Chemicals,Petrochemicals |
Temperature | Unfer 480℃ |
Material | SS sintered fiber felt, SS woven wire mesh |
O-Ring | NBR, fluororubber |
Application | water filter |
Dirt holding capacity | 16.9~41mg/cm2 |
10inch Stainless Steel Pleated Filter Cartridge Product Image:
Sany pleated stainless steel sintered mesh filter production processes
1> The multilayer stainless steel woven wire mesh is sintered by high temperature to be a new filter screen.
2> The new filter screen is made into a filter cartridge by pleated.
3> Then Weld star tray at both ends of the filter cartridge.
Sany pleated stainless steel sintered mesh filter technical parameters
Material | Stainless steel 304 or 316L |
Mesh layers | Standard 3 layers sintered wire mesh |
Microm rate | 5um-200un |
Pleat height | Less than 150mm |
Connectors | Star tray |
If you want to know more products please click the link below
Pay attention to qr code
Get the latest information